Aurora Mini II Power Supply
MINI AURORA II Power Supply, compatible with all coil and rotary tattoo machines and tattoo pens, User-friendly, easy voltage adjustment,.
2 footswitch modes – single impulse or constant power
Weight: 0.5 kg
Output Voltage: 1.5v - 16v
1/4" mono jack slot for standard clip cord and footswitch (the footswitch is not required to run the machine)
Its CNC-machined anodized aluminum, the built-in magnets and the silicone small supports make the Aurora Mini II suitable to work on a range of different surfaces.
The LED display shows the voltage data and features specific back lights to indicate the voltage intensity
Dual machine power supply mode, to use 2 machines simultaneously
THE BOX INCLUDES
1 × MINI AURORA II power supply
1 × power cable
Single machine output mode
When the LED display shows 1-0 the power supply is in stand-alone mode,
the left jack slot is connected to the tattoo machine, and the right jack slot is connected to the pedal or handswitch.
Dual machine output mode
When the LED display shows 1-1 the power supply is in dual machine mode, and the only switch to control the power impulse is the button on top, when both the slots are connetced to the tattoo machines.
1 The New 2nd Generation MINI AURORA II power supply comes with a LED voltage display and 5 easy touch set up buttons.
2 The MINI AURORA II features an user friendly backlight, designed to flash to indicate the voltage level
3 The minimum adjustable Voltage uniti s 0.1V and the regulation can range from 1.5V to 16V. 2.5 amp true RMS continuous current, Universal input 110-240V 50/60hz
4 The MINI AURORA II features a dual machine running mode (the right slot can either house a footswitch/handswitch device or a 2nd machine at need).
5 The “Stand alone” running mode is activated by holding the “up” and “left” arrow buttons simultaneously for 3 seconds until the LED display shows “1-0”. This confirms the activation of the single machine mode and the pedal/handswitch device.
6 The “Dual machine” running mode is activated by holding the “donw” and “right” arrow buttons simultaneously for 3 seconds until the LED display shows “1-1”. This confirms the activation of the dual machine mode and the right slot can now be used to house a 2nd machine.
PS: the Dual machine mode allows you to adjust the 2 machines on different voltages, with the power supply keeping in memory the voltage of the last machine used.